Zinc Dust Superfine

SF5 (Fine)	SF5 (Fine)	Distilled fine metal powders. Optimally sized by screening and air classification.	• Chemicals, • Coatings, • Lubricants, • Paints, • Platings, • Purification	50 Kg Pails
SF7 (Super Fine)	SF7 (Super Fine)	Distilled fine metal powders. Optimally sized by screening and air classification.	• Chemicals, • Coatings, • Lubricants, • Paints, • Platings, • Purification	50 Kg Pails

Liquid Defoamers (Pmc Ouvrie France)

EROL AMP 444	EROL AMP 444	Defoamer EROL AMP 444 is an aqueous dispersion of organics solids in hydrocarbons.	Defoamer EROL AMP 444 is recommended to cure the foaming problems in aqueous media. It can be used in various processes such as: * Water Treatment, * Pulp and Paper Industry, * Textile.	200 Kg Drums
Erol AMP997	Erol AMP997			200 Kg Drums

Polyurethane Hardener (Tosoh Corporation)

Coronate MPAX-75

Coronate MPAX-75

HDI based modified polyisocyanate, containing isocyanurate, Approximately 75% solid content with propylene glycol monomethylether acetate and xylene

Coronate MPAX-75 can be combined with acrylic polyols to produce non-yellowing colorfast paint with excellent resistance against weather and ultra-violet rays. This two-component type is most suitable for use in automative refinishes, industrial purposes, etc. The combination of CORONATE MPAX-75 with alkyd polyols results in two-component type paint, which is applied for industrial purpose, wood finishes, etc. The addition of CORONATE MPAX-75 to some nitro-cellulose based or polyurethane based paints, distinctively improves their physical properties, such as chemical resistance to solvents. however, it is necessary to test the compatibility for each combination, and great care should be taken during testing.

200 Kg Drums

Cellulose Fibers ( Creafills USA)

Creamix TC 1004/5	Creamix TC 1004/5	Gray Fiber	Construction adhesives, Cement tile adhesives (Powder adhesives)	22.7 Kg Bags
Creamix TC 207	Creamix TC 207	Off-White Fiber	Tile grouts, Cement tile adhesives (powder adhesives)	20 Kg Bags
Creamix TC 507	Creamix TC 507	Off-White Fiber	Cement tile adhesives (powder adhesives), Thermal insulation systems	20 Kg Bags

In-Can Preservatives (Vink Chemicals)

Biopol TK1

Biopol TK1

BIOPOL TK 1 is a broad spectrum biocide based on water based combination of CMIT/MIT and formaldehyde. It is suitable for the preservation of a broad range of waterborne products. The balance of its active ingredients reduces the risk of contact allergic.

BIOPOL TK 1 is an excellent in-can preservative for dispersion paints, dispersion plasters, polymer dispersions, glues, adhesives and sealants. The optimum dose of BIOPOL TK 1 as preservative should be determined by the means of challenge tests in our laboratories, but we can recommend a dose between 0,05 an 0,30 % depending on the application.

200 Kg Drums

Powder Defoamer (Pmc Ouvrie France)

Delfoam DK/T	Delfoam DK/T	Defoamer DELFOAM DKT is a blend of polyether polyols and natural fatty acids and amorphous silica.	APPLICATION: Defoamer DELFOAM DKT is recommended to cure the foaming problems in dry blend which are dissolved in water before application. It can be used in various powder systems such as: * Cement, * Adhesives, * Gypsum Plasters, * Powdered Paints	25 Kg Bags
EROL DP 93	EROL DP 93	Defoamer EROL DP 93 is a blend of polyether polyols and natural fatty acids and amorphous silica.	Defoamer EROL DP 93 is recommended to cure the foaming problems in dry blend which are dissolved in water before application. It can be used in various powder systems such as: * Cement	25 Kg Bags

Polymer Emulsions (Dow Chemicals)

Styrene Acrylic Co-polymer	Styrene Acrylic Co-polymer
Acrylic Co-polymer Emulsion	Acrylic Co-polymer Emulsion
VAM Acrylic Co-polymer	VAM Acrylic Co-polymer
VAM-VEOVA Co-polymer	VAM-VEOVA Co-polymer

Re-Dispersible Polymer Powder (Dow Chemicals)

Axilat HP 8510	Axilat HP 8510	Vinyl acetate and versatate copolymer resin in redispersable powder form.	SUGGESTED USE – APPLICATION -Tile adhesive mortars – External Insulation Finishing Systems (EIFS) – Self-levelling underlayment (SLU) – Gypsum joint compounds and renders/skimcoats – Façade renders	25 Kg Bags
Axilat HP 8513	Axilat HP 8513	Vinyl acetate and versatate copolymer resin in redispersable powder form.	SUGGESTED USE – APPLICATION -Tile adhesive mortars – External Insulation Finishing Systems (EIFS) – Self-levelling underlayment (SLU) – Gypsum joint compounds and renders/skimcoats – Façade renders	25 Kg Bags
Axilat HP 8517	Axilat HP 8517	Vinyl acetate and versatate copolymer resin in redispersable powder form.	SUGGESTED USE – APPLICATION AXILAT HP 8517 is highly recommended for : -Façade renders -Tile adhesive mortars AXILAT HP 8517 can be used for : -Repair mortars -Joint mortars	25 Kg Bags
Axilat HP 8538	Axilat HP 8538	Vinyl acetate and vinyl versatate copolymer resin in redispersable powder form.	SUGGESTED USE – APPLICATION – Designed for External Insulation Finishing Systems (EIFS) – Suitable for mortars (cement and gypsum based)	25 Kg Bags
Axilat HP 860 H	Axilat HP 860 H	Vinyl acetate and versatate copolymer resin in redispersible powder form.	SUGGESTED USE – APPLICATION AXILAT HP 860 H is highly recommended for: -adhesives, base-coats and top coats for exterior nsulation and finishing systems (EIFS) AXILAT HP 860 H can be used for: – Façade renders – Joint mortars	25 Kg Bags

Cellulose Ethers (Huzhou Mizudahope Bioscience Co. Ltd)

Hydroxypropylmethylcellulose (HPMC)	6M, 15M, 30M, 40M, 50M, 60, 70M	Hydroxyproxylmethylcellulose has a white or off-white powder. The hygroscopic product is tasteless and odorless and it is available in two milling grades, i.e. as powder and fine powder.	Used in mainly in construction industry (production of dry building mixtures), but can be also used also in production of paint, detergent and cosmetics, medicine, foods, agriculture, chemicals, textile, tobacco etc.	25 Kg Bags
Hydroxypropylmethylcellulose (HEMC)	6M, 15M, 30M, 40M, 50M, 60, 70M	Hydroxyethylmethylcellulose is a white or off-white powder. The hygroscopic product is tasteless and odorless and it is available in two milling grades, i.e. as powder and fine powder.	Used in mainly in construction industry (production of dry building mixtures), but can be also used also in production of paint, detergent and cosmetics, medicine, foods, agriculture, chemicals, textile, tobacco etc.	25 Kg Bags
Hydroxypropylcellulose (HEC)	6M, 15M, 30M, 40M, 50M	Hydroxyethylcellulose is a white or off-white powder. The hygroscopic product is tasteless and odorless and it is available in four milling grades, i.e. as coarse powder (G), powder (P), fine powder (PF) and very fine powder (PP).	Used mainly in production of paints, building materials, detergents and cosmetics, medicine, chemicals etc.	25 Kg Bags

Epoxy Curing Agents & Epoxy Hardeners(Admark Polycoats Pvt. Ltd)

Grades	Description	Application	Packing
AP 5115	High Viscosity, reactive polyamide hardener for epoxy resins based coatings. Adhesives.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc. Suitable to make epoxy adducts. Can be used in combination with other polyamides, polyamines or other hardeners.
AP 5115 LC	High Viscosity, reactive polyamide hardener for epoxy resins based coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc. Suitable to make epoxy adducts. Can be used in combination with other polyamides, polyamines or other hardeners.
AP 5125	Medium Viscosity, reactive polyamide hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. structural steel, concrete surface. Can be used in Epoxy Polyamide type of Structural adhesives, Sealants, Casting, Laminating etc.
AP 5125 LC	Medium Viscosity, reactive polyamide hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution orepoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems.Ideal for marine and protective coatings e.g. structural steel, concrete surface. Can be used in Epoxy Polyamide type of Structural adhesives,Sealants, Casting, Laminating etc.
AP 5140	Low Viscosity, reactive polyamide hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc. Suitable to make epoxy adducts. Can be used in combination with other polyamides, polyamines or other hardeners.
AP 5115 X70	Low Viscosity, reactive polyamide hardener solution for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete Surface etc.	190
AP 5115 X70 LC	Low Viscosity, reactive polyamide hardener solution for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete Surface etc.	190
AP 5104 X 60	high molecular weight polyamide resin solution for epoxy resins based lacquers and coatings.	It is used in combination with solids epoxy resin solution. Ideal for epoxy paint and coatings. Suitable for application with standard one component airless spray systems. Ideal for marine and protective coatings.

POLYAMIDE ADDUCTS

AP 5050	low viscosity, reactive polyamide adduct hardner for epoxy resins based lacquers and coatings, contains Benzyl Alcohol.	It is used   in combination with   liquid Epoxy resins   or solids epoxy   resin solution . Suitable for application with standard one-component airless spray systems.   deal for marine and protective coatings   e.g , structural   steel , concrete   etc. Self level floor coating, adhesives, putties.
AP 5180	Low Viscosity, reactive, polyamide epoxy   adduct hardener solution for epoxy resins based lacquers and coatings.	It is used   in combination with   solid epoxy resin   solution or Suitable   for making high solids   coating compositions with   a workable wide   range of Pot   lives. Suitable for application   with standard one-component airless   spray systems. Ideal for   marine and protective   coatings e.g tank   coatings, structural steel, concrete flooring etc.
AP 5450	Low viscosity modified Polyamidoamine adduct curing agent for epoxy resin based	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Ideal for concrete substrates as well as solvent-free of high solid protective coatings e.g., structural steel, concrete etc. The product can be applied to all types of wet-damp and difficult to wet substrates.
AP 5010	Polyamide adduct hardener for epoxy resin based lacquers and coatings.	It is used in combination with liquid epoxy resins, solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Ideal for steel substrates suitable for anti corrosion protection and ship-building and construction industry

POLYAMIDO AMINES

AP 5500	Low Viscosity, reactive poly- amido amine hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for concrete flooring, crack injection etc. Can be used in combination with polyamides, polyamines or other hardeners for suitable applications in marine and protective coatings.	190
AP 5160	Reactive poly- amido amine hardener for epoxy resins based coatings.	It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive as well as non-reactive diluents. Ideal for concrete repair compounds, castings, encapsulations, potting and solvent free coatings, adhesive etc. Can be used in combination with polyamides or other hardener to reduce the viscosity.	190
AP 5503	Low Viscosity, reactive poly- amido amine hardener for epoxy resins based coating	It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for concrete coating, crack injection, Flooring etc. Can be used in combination with polyamides, polyamines or other hardeners for suitable applications in protective coatings.	190

CYCLOALIPHATIC AMINES

AP 5618	Low Viscosity, Low   colour modified cycloalphatic amine,   ambient as well as     low temperature curing hardener for epoxy high gloss, chemical resistant coatings.	It is used   in combination with   liquid Epoxy resins       Suitable for application   with standard   one-component airless spray   systems.   deal for   high solid protective coatings e.g., structural steel, concrete etc. Self level floor coating.	200
AP 5205	Low viscosity modified cycloaliphatic amine curing agent for epoxy resin based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g., structural steel, concrete etc. Self level floor coating.	200
AP 5956	Low Viscosity, reactive amine adduct hardener for epoxy resin based lacquers and coatings.	It is used   in combination with   liquid Epoxy resins   or solids epoxy   resin solution or epoxy   resin modified by   means of reactive   as well as   non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine   and protective coatings   e.g., structural steel,   concrete etc. Self   level floor coating.
AP 5768	Extremely low viscosity modified cycloaliphatic amine curing agent for epoxy resin based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy   resin modified by   means of reactive   as well as   non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for protective   and decorative coatings e.g., structural steel, concrete etc. Self level floor coating.	200
AP4237	low viscosity, long pot-lifr, modified apliphatic amine hardener for epoxy resins based coatings. Suitable for high solids or solvent free coatings.	It is used in combination with liquid epoxy resins. Suitable for application with standard one-component airless spray systems. Ideal for solvent free coatings, flooring, laminates and castings.	190
AP 1065	AP1065 is a modified cyloaliphatic amine for epoxy hardener. It is specially used to cure the epoxy resin at high humidity, low temperatures and underwater conditions. It exhibits good chemical resistance with good color stability.	AP 1065 is a low viscosity modified cylcoaliphatic amine, underwater curing epoxy hardener. It is used for solvent and solventless coatings and floorings, especially under low temperature and damp conditions. It is also used with putty for underwater applications.

ALIPHATIC AMINES

AP 1009

Low Viscosity, Long Pot-life, modified aliphatic amine hardener for epoxy resins based coatings. Suitable for high solids or solvent free coatings.

It is used in combination with liquid Epoxy resins .Suitable for application with standard one-component airless spray systems. Ideal for solvent free coatings, flooring, laminates and castings.

MODIFIED CYCLOALIPHATIC AMINES

AP 5905	Low Viscosity, modified   cycloaliphatic amine adduct   hardener for epoxy   resin based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy   resin modified by   means of reactive   as well as   non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for protective coatings e.g., structural steel, concrete etc. Self level floor coating.
AP 5904	Low Viscosity, modified   cycloaliphatic amine adduct   hardener for epoxy   resin based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified   by means of   reactive as well   as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for protective coatings e.g., structural steel, concrete etc. Self level floor coating.	200

PHENALKAMINES

AP 1040	Low Viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.	AP 1040 is   used as a   hardener for liquid   epoxy or solid   epoxy resin solution based   compositions. Suitable for   making solvent free   or high solids coating   compositions, which can   be applied with   standard one component airless spray systems. No critical mixing ratio. Ideal for marine and   protective   coatings     e.g.   tank   linings,     structural   steel,   concrete floorings, etc.
AP 1041 (N)	High Viscosity, reactive, phenalkamine hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc. Can be used in combination with polyamides and other hardeners.
AP 1058	Low viscosity, reactive, phenalkamine hardener lor epoxy resins based lacquers and coatings.	It is used   in combination with   liquid Epoxy resins   or solids epoxy   resin solution or epoxy   resin modified by   means of reactive   as well as   non-reactive diluents. Suitable   for making high   solids coating compositions with   a workable wide   range of Pot lives.   Suitable for application   with standard one-component airless   spray systems. Ideal for   marine and protective   coatings e.g ,   structural steel ,   concrete flooring etc. Suitable   to make epoxy   adducts. Can be   used in combination   with polyamides, polyamines or other hardeners.
AP 1041 LV	Low Viscosity, reactive, Mannich- based amine hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive diluents or non- reactive diluents. Suitable for making high solids and solvent less coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. structural steel, concrete flooring etc. Compatible with other hardeners like polyamides, amine adducts etc.	200
AP 1041 X 90	Medium viscosity reactive, Mannich- based amine hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for making high solids coating compositions with   a workable wide   range of Pot   lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete flooring etc. Can be used in combination with polyamides and other hardeners.	200
AP 1026	Low viscosity, reactive, Mannich – based amine hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy   resin modified by   means of reactive   as well as   non-reactive diluents. Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems.	200

PHENALKAMINES ADDUCT

AP 1080	Low Viscosity, reactive,   phenalkamine adduct hardener   solution for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resins modified by means of reactive or non-reactive diluents. Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems.   Ideal     for   marine   and     protective   coatings   e.g     tank   coatings, structural steel, concrete flooring etc.	200
AP 1777	Medium Viscosity, reactive, phenalkamine – epoxy resin adducts hardener solution for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resins modified by means of reactive or non-reactive diluents.   Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g tank coatings, structural steel, concrete flooring etc.	200
AP 1077	Low Viscosity, reactive   phenalkamine hardener solution   with improved blush resistance. It is suitable for low temperature curing of epoxy composition.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resins modified by means of reactive diluents or non-reactive diluents. Suitable   for making high   solids coating compositions with   a workable wide range   of Pot lives.   Suitable for application   with standard one-component airless spray   systems. Ideal for   marine and protective   coatings e.g tank coatings, structural steel, concrete flooring etc.	200
AP 1323	Low Viscosity, reactive, phenalkamine-epoxy resin adduct hardener solution for epoxy based lacquers and coatings.	It is used   in combination with   liquid Epoxy resins   or solid epoxy   resin solution or modified by means of reactive as well as non-reactive diluents. Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g tank coatings, structural steel, concrete flooring etc.	200
AP 1562	Low Viscosity, reactive,   Phenalkamine epoxy hardener   solution for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resins modified by means of reactive or non- reactive diluents.   Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. Ballast tank coatings, structural steel, concrete flooring etc.	200
AP 1300	Medium Viscosity, reactive,   phenalkamine-epoxy resin adduct   hardener solution for epoxy based lacquers and coatings.	It is   used in combination   with liquid Epoxy   resins or solid   epoxy resin solution   or modified by means of reactive as well as non-reactive diluents. Suitable for making high solids coating compositions with a workable wide range of Pot lives. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g tank coatings, structural steel, concrete flooring etc.	200

PHENALKAMIDES

AP 4125	Medium Viscosity, reactive Phenalkamide hardener for epoxy resins based lacquers and coatings.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine   and protective coatings   e.g. structural steel,   concrete surface. Can be used Structural adhesives, Sealants, Casting, Laminating etc.	200
AP 4140	Medium Viscosity, reactive Phenalkamide hardener for epoxy resins based lacquers and coatings. It gives better combined properties of phenalkamines and Polyamides.	It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g. structural steel, concrete flooring etc. Suitable to make epoxy adducts. Can be used in combination with polyamides, polyamines or other hardeners.	200
AP 4115X70	Low Viscosity, reactive phenalkamide hardener solution for epoxy resins based lacquers and coatings. It is based on new phenalkamide technology and gives combined good properties of Phenalkamine and polyamides.	It is used in combination with liquid Epoxy resins or solid epoxy resin solution or epoxy resin modified by means of reactive as well as non reactive diluents. Suitable for application with standard one component airless spray systems. Ideal for marine and protective coatings e.g , structural steel , concrete surface etc. It can replace polyamide 115 x 70 directly where color is not important. Good compatibility with liquid epoxy resins.	200
AP 4115	High Viscosity, reactive rapid cure phenalkamide hardener for epoxy resins based coatings.It is based on new phenalkamide technology and gives combined good properties of Phenalkamine and polyamides.	It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive   as well as   non reactive diluents.   Ideal for marine   and protective coatings e.g , structural steel , concrete flooring etc.	200
AP 4145	High Viscosity, reactive rapid cure phenalkamide hardener for epoxy resins based coatings.It is based on new phenalkamide technology and gives combined good properties of Phenalkamine and polyamides.	It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive   as well as   non reactive diluents.   Ideal for marine   and protective coatings e.g , structural steel , concrete flooring etc.	200
AP 2559	Low   viscosity Phenalkamide     hardener   that     satisfies   both   the     properties between the polyamidoamine and   the phenalkamine technology.   It shows better properties crossing over   the limitations of   both technologies. It exhibits the rapid   cure at ambient   temperature, with extreme   flexibility and better adhesion to concrete surface.	Suitable for application with concrete coatings. Bonding old to new concrete, crack injection, primer for flooring,

 

Other chemicals

Tri Iso Butyl Phosphate (T.I.B.P.)	Tri Iso Butyl Phosphate (T.I.B.P.)	Tri iso butyl phosphate is a very strong, polar solvent.	TiBP is mainly used as an antifoam in various aqueous systems	200 Kg Drums
Sodium Gluconate	Sodium Gluconate	Sodium gluconate is the sodium salt of gluconic acid	Widely used in concrete admixture, cement retarder, water reducer agent
Tri Ethanolamine (TEA)	Tri Ethanolamine (TEA)	TEA, is a viscous organic compound that is both a tertiary amine and a triol.	TEA is also used as organic additive (0.1 wt. %) in the grinding of cement clinker and as an Accelerator in concrete	230 Kg Drums
Benzyl Alcohol	Benzyl Alcohol	Benzyl alcohol is a colorless liquid with a mild pleasant aromatic odor.	Benzyl alcohol is used as a general solvent and Plasticizers for Epoxy Hardener	210 Kg Drums
Titanium Dioxide	Titanium Dioxide	Titanium dioxide, also known as is the naturally occurring oxide of titanium	Used as Pigment	25 Kg Bags
Chlorinated Paraffin Wax 52%	Chlorinated Paraffin Wax 52%	Chlorinated paraffins (CPs) are a complex mixture of polychlorinated n-alkanes	Plasticizers	265 Kg Drums
Di Butyl Phthalate	Di Butyl Phthalate	Dibutyl phthalate (DBP) is a commonly used plasticizer	Plasticizers	235 Kg Drums
Carbon Black	Carbon Black	Carbon black has a high surface-area-to volume ratio, albeit lower than that of activated carbon.	Used as Pigment	25 Kg Bags
Oleic Acid	Oleic Acid	Fatty/Oleic Acids promote the compactability and ease of processing concrete mixtures with low water / cement values</	>In Concrete Admixtures	180 Kg Drums
Polypropylene Fibers	Polypropylene Fibers	Polypropylene fibre concrete contains thousands of individual fibres which are evenly dispersed throughout the concrete during the mixing process,	Fibers Create a matrix-like structure that provides additional benefits to concrete such as long-term durability and toughness